Hunter KDS II BMW ML / QuickGrip Adapter
incl. installation and training
The 3D wheel aligner KDS II BMW ML (manual lift) from the company Hunter, fulfills all requirements on the part of BMW and a modern workshop.
The included ride height targets measure the ride height of the vehicle at any time and thus ensure that the correct target data are selected.
With this system, the QuickGrip Adapter are already included.
The QuickGrip Adapter require a rolling compensation (rim compensation) of about 20 cm forward, but are mounted in seconds.
There is no sensitive measuring equipment on the vehicle or the stage at any time. This is safely installed in the camera beam and thus protected from damage and contamination. The camera beam including the column is fixed to the ground. The camera beam can be manually adjusted in height so that the 4 cameras can detect the reflectors in the lower (incoming measurement) and upper (adjustment work) lifting positions. The shifting is done almost without force by means of a balancing weight.
![image_feedback](/upload/_base/footer/banner.webp)