Hydraulic double scissor lift with 3 tonne load capacity for flush-to-floor installation.
Double scissor lift for in-ground installation to make driving over the lift easier, without protruding components in the lift area.
High level of operating comfort due to continuously adjustable support plate length, no subsequent pushing of the vehicle required.
Foundation inserts for extending the support plates when the lift is retracted prevent time-consuming raising during set-up and time-consuming intermediate stops during retraction.
Support plates and pull-outs granule-coated for optimum protection against vehicle slippage.
Double the safety due to two redundant cylinders on each side of the scissors.
No compressed air required to operate the lifting platform.
Full lifting power even from the bottom
Most lifting height range thanks to innovative cylinder lift-out support.
Quiet setting in the lowest position due to lowering delay installed as standard.
Soft start from the lowest position for gentle attachment to the vehicle.
High level of lateral stability due to generously sized scissor arms.
No mechanical connection between the scissors, so no trip edges.
Simple EMERGENCY OFF function in the event of power failure.
Varnished with high-quality powder coating: RAL 7016.
Base frame with dual-layer powdered varnish boosts corrosion-resistance.
Fully automatic synchronisation of support plates and high level of safety due to cylinder distance measurement system (""linear absolute measurement system"").
Crushing / shearing protection due to CE stop.
Technical Details
Capacity: CE 3500 kg
Lifting height: 1815 mm
Lifting-lowering time: 35/35 s
Installation depth: 115 mm
Power: 2,2 kW
Operating pressure: 270 ba
Power supply: 3/N/P 400V 50 Hz
Weight: 900 kg
Packaging dimension: 2100 x 760 x 71mm
Scope of delievery
Double scissor lift, type: TWIN F IV 3.0 U
Plattform Extension to 2.165 mm
Hard Rubber Chocks h= 50 mm (8 pcs.) (VZ 975100)
5m hydraulic Hoses
Foundation inserts
Operation desk with control unit and hydraulic unit
Operating manual and test log
EC CE conformity instructions
Transport packaging
Optional Accessories
Assembly Material: VM 995021
Remarks
The G12 model can also be lifted
So Model G12 is possible to lift
![image_feedback](/upload/_base/footer/banner.webp)